This page is optimized for mobile devices, if you would prefer the desktop version just
click here
Company:
The Heico Companies LLC
Location:
US -
US
Posted: July 1, 2024
MACHINIST OPPORTUNITY with growth opportunities in an excellent manufacturing environment and family atmosphere. This position is a member of the Machine Shop. The machinist will report directly to the Machine Shop Supervisor.
Primary Responsibilities
This position is described as a CNC MACHINIST with the intent of the individual performing set-up and operation of CNC mills/ and or lathes to produce and end product that meets or exceeds design specifications. Preferred candidates should be able to create set-ups and machine needed parts with some supervision.
Safety
Puts safety first above all else.
Works safely and assesses all situations before proceeding.
Keeps work area clean and free from hazards.
Stays current on all training requirements.
Uses guarding provided and does all necessary pre-work checks.
Quality
Progress with training on the process to inspect parts and materials used in the production process are free from quality defects.
Work to gain the ability to accurately use and ensure calibration of measuring tools to validate diameters ranging from .02" to 20" and liner dimensions up to 120" using Calipers, Bore gauges, Micrometers, Thread gauge, Depth gauge, Height gauges, Gage blocks, Pin gages, and Hardness testers. CMM experience is a plus.
Read and interpret schematics and drawings, including geometric dimensioning/tolerancing, communicating with Engineers as necessary.
Train to progress with skill sets that produces quality documentation, including non-conformance reporting.
Abide by the methods and procedures inherent in position as directed by management.
Strong computer, Microsoft Office skills.
Other duties as assigned.
Machine product to required specification Train and progress in the ability to read & process 2-d detail prints.
Set-up and operate CNC mills and/or lathes to produce a product that meets or exceeds design specifications.
Create and document straight forward programs, where needed. Record proper set-up documentation.
Inspection and documentation Inspection of in-process product is required. Ensure product meets requirements.
Adjust machine tools to meet specifications.
When required, document measurements on inspection sheets
Knowledge of machine tools, equipment, materials, and inspection methods Can setup and run previously run jobs in work centers that they are familiar with, whether the work center is a lathe, mill, grinder, or other piece of equipment.
Has a working knowledge of conventional machining techniques.
Ability to gain the experience with machining different materials including different grades of steel, aluminum, brass, PVC, UHMW, etc.
Knows how to use traditional inspection equipment such as height gages, dial indicators, micrometers, and calipers.
Skills & Relevant Work Experience Utilizes strong written and oral communication skills often and consistently. Clearly understands the department objectives. Is interactive with cross functional team members.
The employee shall have capabilities and experience to work in team environment to accomplish employee's clear goals and objectives that support the overall departmental strategic plan. This employee also supports the corporate mission, vision, and core values - specific to the department contributions. Works well with other various departments.
The employee shall be able to create set-ups and machine needed parts with some supervision. When direction is required, the employee should be able to seek out the proper personnel that will provide the direction.
Understands business objectives, maintains a level of business integrity; proven success in facilities operations. Makes independent decisions under guidance of department management.
Demonstrates self-discipline in organizing tasking to plan and meet time and budgetary constraints, quality, and procedures.
Basic computer skills for time reporting and facility safety inspections.
Professional and positive attitude with the initiative to cooperate in a team work environment.
Fluency in English
Knowledge and ability to use mechanics tools
Machining and fabrication knowledge
Proven ability to handle multiple projects and meet deadlines
General assembly knowledge of industrial equipment
Strive for Steelastic Excellence Increase product knowledge, try new ideas and machining techniques, strive for a better and/or faster way of doing a job and train on any piece of equipment that they are capable of.
Miscellaneous Have a good attitude, start work on time, perform good housekeeping, communicate with others, be aware of his/her area and other's safety, be a good team member.
Always be looking to be more efficient by running multiple work centers at the same time when and where possible and work in other departments such as fabrication or assembly if requested.
Execute safety and facility improvement projects as needed.
Primary Responsibilities
This position is described as a CNC MACHINIST with the intent of the individual performing set-up and operation of CNC mills/ and or lathes to produce and end product that meets or exceeds design specifications. Preferred candidates should be able to create set-ups and machine needed parts with some supervision.
Safety
Puts safety first above all else.
Works safely and assesses all situations before proceeding.
Keeps work area clean and free from hazards.
Stays current on all training requirements.
Uses guarding provided and does all necessary pre-work checks.
Quality
Progress with training on the process to inspect parts and materials used in the production process are free from quality defects.
Work to gain the ability to accurately use and ensure calibration of measuring tools to validate diameters ranging from .02" to 20" and liner dimensions up to 120" using Calipers, Bore gauges, Micrometers, Thread gauge, Depth gauge, Height gauges, Gage blocks, Pin gages, and Hardness testers. CMM experience is a plus.
Read and interpret schematics and drawings, including geometric dimensioning/tolerancing, communicating with Engineers as necessary.
Train to progress with skill sets that produces quality documentation, including non-conformance reporting.
Abide by the methods and procedures inherent in position as directed by management.
Strong computer, Microsoft Office skills.
Other duties as assigned.
Machine product to required specification Train and progress in the ability to read & process 2-d detail prints.
Set-up and operate CNC mills and/or lathes to produce a product that meets or exceeds design specifications.
Create and document straight forward programs, where needed. Record proper set-up documentation.
Inspection and documentation Inspection of in-process product is required. Ensure product meets requirements.
Adjust machine tools to meet specifications.
When required, document measurements on inspection sheets
Knowledge of machine tools, equipment, materials, and inspection methods Can setup and run previously run jobs in work centers that they are familiar with, whether the work center is a lathe, mill, grinder, or other piece of equipment.
Has a working knowledge of conventional machining techniques.
Ability to gain the experience with machining different materials including different grades of steel, aluminum, brass, PVC, UHMW, etc.
Knows how to use traditional inspection equipment such as height gages, dial indicators, micrometers, and calipers.
Skills & Relevant Work Experience Utilizes strong written and oral communication skills often and consistently. Clearly understands the department objectives. Is interactive with cross functional team members.
The employee shall have capabilities and experience to work in team environment to accomplish employee's clear goals and objectives that support the overall departmental strategic plan. This employee also supports the corporate mission, vision, and core values - specific to the department contributions. Works well with other various departments.
The employee shall be able to create set-ups and machine needed parts with some supervision. When direction is required, the employee should be able to seek out the proper personnel that will provide the direction.
Understands business objectives, maintains a level of business integrity; proven success in facilities operations. Makes independent decisions under guidance of department management.
Demonstrates self-discipline in organizing tasking to plan and meet time and budgetary constraints, quality, and procedures.
Basic computer skills for time reporting and facility safety inspections.
Professional and positive attitude with the initiative to cooperate in a team work environment.
Fluency in English
Knowledge and ability to use mechanics tools
Machining and fabrication knowledge
Proven ability to handle multiple projects and meet deadlines
General assembly knowledge of industrial equipment
Strive for Steelastic Excellence Increase product knowledge, try new ideas and machining techniques, strive for a better and/or faster way of doing a job and train on any piece of equipment that they are capable of.
Miscellaneous Have a good attitude, start work on time, perform good housekeeping, communicate with others, be aware of his/her area and other's safety, be a good team member.
Always be looking to be more efficient by running multiple work centers at the same time when and where possible and work in other departments such as fabrication or assembly if requested.
Execute safety and facility improvement projects as needed.
Read the full job description and apply online on the recuiter's web-site
Related Job Postings
CNC Machinist - 1st Shift
Company:
The Heico Companies LLC
Location:
US -
US
Posted: June 27, 2024
Join us in our new EXETER NH location!Competitive Rates!! C/A Design, Inc. • is part of the Heico Companies, and in aggregate, Heico's businesses generate more than $3.2 billion in revenues. • C/A Design is an Innovator and leader in the Brazing industry providing custom engineered cooling solutions
read more...
Crane Mechanic
Company:
The Heico Companies LLC
Category:
Automotive
Posted: June 30, 2024
Bo-Mac Contractors, Ltd. in the Beaumont, TX area is offering challenging and exciting career opportunities for Crane Mechanics. We are seeking qualified candidates that are focused on project success and exceeding customer expectations. Qualified candidates must be able to perform all duties listed
read more...
MACHINIST 1 CNC Operator
Company:
The Heico Companies LLC
Location:
US -
US
Posted: July 1, 2024
MACHINIST OPPORTUNITY with growth opportunities in an excellent manufacturing environment and family atmosphere. This position is a member of the Machine Shop. The machinist will report directly to the Machine Shop Supervisor. • Primary Responsibilities • This position is described as a
read more...
CNC Programmer - Mazak Automation Cell
Company:
The Heico Companies LLC
Location:
US -
US
Posted: July 1, 2024
Join us in our new EXETER NH location! • C/A Design, Inc. is part of the Heico Companies, and in aggregate, Heico's businesses generate more than $3.2 billion in revenues. C/A Design is an Innovator and leader in the Brazing industry providing custom engineered cooling solutions while
read more...
Warehouse Laborers Construction
Company:
The Heico Companies LLC
Posted: July 1, 2024
• Ceco Concrete Construction is the nation's largest concrete subcontractor.Ceco was founded in 1912 and has more than 100 years of experience serving the commercial construction markets, partnering with our clients to provide value to projects of varying scope and complexity. • Primary
read more...