<< Chapter < Page Chapter >> Page >

Any system will have to be clearly and concisely documented and communicated effectively to appropriate employees within the company.

It is important to work closely with key company employees and managers so that they clearly understand the importance of such systems and their roles in achieving effective compliance.

Since the responsibility for food safety rests with you, direct verification of all matters is extremely important for Basic Level requirements. You should personally and frequently monitor activities and record your findings.

Evaluation of incidents

Incident
Any event where, based on the information available, there are concerns about actual or suspected threats to the safety or quality of a product that could require intervention to protect consumers’ interests.

As a person responsible for food safety management, it is imperative that you have a system in place to

  • identify when an incident is or has occurred
  • assess and analyse the significance of the incident and the potential risk to the consumer
  • decide upon the appropriate action to take to protect consumer safety and your customer’s reputation.

In any working day, information about potential problems with food products is continually entering and transferred around a company; for example, raw materials are outside agreed specification; the wrong ingredients are placed in a batch of products; or a piece of equipment has broken down or malfunctions. There must be good and quick internal communication to make sure that information about product problems, and more importantly incidents, are collected and quickly assessed by you and your colleagues to understand their significance and impact.

Identification

You will have to analyze and make judgments about what to do when issues or incidents occur. You will have to decide what action to take, if any.

The process of identifying incidents is based on your knowledge of the likelihood of something occurring and its possible severity or effect. It is very much linked into the understanding of hazards in the workplace and knowing your raw materials, the manufacturing process, product, suppliers, and people working with the product.

The keys to quickly indentifying an incident are knowledge, communication, training, and vigilance.

Since you will be responsible for deciding upon and coordinating actions when a problem occurs, communication between you and your colleagues is essential to keep all informed about what is going on or has been revealed. Their cooperation is vital in maintaining control a situation.

Handling complaints and analyzing them correctly are key factors in the relationship between you and your customers. There should be accurate and timely transfer of information.

Analysis

To ensure a correct judgment is made on the action to be taken to safeguard consumer safety, you must carefully screen the information you have. Accurate information and data is necessary, but on some occasions information may not always be readily available. Then your knowledge and experience as the food safety specialist within your company becomes vital.

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Food safety knowledge network basic level requirements. OpenStax CNX. Dec 30, 2009 Download for free at http://cnx.org/content/col11142/1.4
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Food safety knowledge network basic level requirements' conversation and receive update notifications?

Ask